D-120A Industrial Power Supply Unit Dual Output Switching Power Supply

Product Description

Product Description

Specification

 

D-120   120W Two Groups of Switching Power Supply
Project		D-120A		D-120B		D-120C
Output	Output channel	CH1	CH2	CH1	CH2	CH1	CH2
	DC voltage	5V	12V	5V	24V	12V	24V
	Rated current	12A	5A	12A	2.5A	5A	2.5A
	Current range	0.5-15A	0.1-7A	0.5-15A	0.1-3.5A	0.5-7A	0.1-3.5A
	Rated power	120W		120W		120W
	Ripple and noise	<50mV	<120mV	<50mV	<120mV	<120mV	<120mV
	Voltage accuracy	±2%	±10%	±2%	±10%	±1.5%	±10%
	Output voltage regulation range	CH1: ±10%
	Load adjustment rate	±1.5%	±3.0%	±1.5%	±3.0%	±1.5%	±3.0%
	Linear adjustment rate	±0.5%	±1.0%	±0.5%	±1.0%	±0.5%	±1.0%
Input	overload protection	85-132/180-264VAC 47Hz~63Hz (254VDC~370VDC)
	Efficiency (typical)	>78%		>81%		>81%
	Working current	<2.2A 110VAC   <1.1A 220VAC
	Impulse current	110VAC  20A,   220VAC  50A
	Start, rise, hold time	2000ms,30ms,20ms :220VAC/1200ms,30ms,10ms :115VAC
Protect	overload protection	105% - 150% type: constant current output + VO reduced to undervoltage point cut off output reset: power on again
	Short circuit protection	+VO drops to undervoltage point, close output
Environmental Science	Working temperature and humidity	-10ºC~+50ºC;20%~90RH
	Storage temperature and humidity	-20ºC~+85ºC;10%~95RH
Safety regulations	Withstand voltage	Input output: 1.5kVac input shell: 1.5kVac output shell: 0.5kvac for 1 minute
	Leakage current	5mA at 1.5kVac input-output
	Leakage current	Input output at 220VAC < 1mA
	Isolation resistance	Input output, input shell, output shell: 500VDC / 100M Ω
Other	size	199*110*50mm
	Net weight / gross weight	616.3/654.3g
Remarks	Ripple and noise measurement method: use a 12 "twisted pair, and connect 0.1uF and 47uF capacitors in parallel at the terminal, and measure at 20MHz bandwidth.  The efficiency is tested at an input voltage of 230VAC, rated load, and an ambient temperature of 25 ºC. Accuracy: including setting error, linear adjustment rate and load adjustment rate. Linear regulation test method: under rated load from low voltage to high voltage test load regulation test method: from 0% - 100% rated load. The start-up time is measured under the cold start state. The quick and frequent switch on and off may increase the start-up time. When the operating altitude is higher than 2000m, the operating environment temperature needs to be reduced by 5 ºC / 1000m

Company Profile

 

Packing & Delivery

Safety Packaging

FAQ

1. who are we?
We are based in Zhejiang, China, start from 2015,sell to Domestic Market(30.00%),North America(20.00%),South Asia(6.00%),Mid East(6.00%),Eastern Asia(5.00%),Oceania(5.00%),Southern Europe(5.00%),Western Europe(4.00%),Northern Europe(4.00%),Africa(4.00%),South America(3.00%),Central America(3.00%),Southeast Asia(3.00%),Eastern Europe(2.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Switching Power Supply

4. why should you buy from us not from other suppliers?
Junlin switching power supply is widely used in industrial automation LED lighting and display, medical, security, power control, metallurgy, water treatment, infrastructure, and other fields.

5. what services can we provide?
Accepted Delivery Terms: null
Accepted Payment Currency:null;
Accepted Payment Type: null;
Language Spoken:null