| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 3 Years |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
| DR-60 60W Din Rail Power Supply | |||||
| Project | Technical index | ||||
| Output | DC voltage | 12V | 24V | ||
| Rated current | 4.5A | 2.5A | |||
| Rated power | 54W | 60W | |||
| Ripple and noise | <120mV | <150mV | |||
| Voltage accuracy | ±1% | ||||
| Ripple and noise | ±10% | ||||
| Load adjustment rate | ±1% | ||||
| Linear adjustment rate | ±1% | ||||
| Input | Voltage range / frequency | 85-264VAC 47Hz~63Hz (120VDC~370VDC) | |||
| Efficiency (typical) | >82% | >84% | |||
| Working current | <1.2A 110VAC <0.8A 220VAC | ||||
| Shock Current | 110VAC 15A, 220VAC 30A | ||||
| Start,Rise,Hold time | 100ms,30ms,21ms :110VAC/100ms,30ms,100ms :220VAC | ||||
| Protect | overload protection | 105%-150% Type:production mode:burp modde automatic recovery after the abnormal condition is lifted | |||
| Short circuit protection | VO The output abnormal condition will be restored automatically after it is removed after the power is restarted | ||||
| Environmental Science | Working temperature and humidity | -10ºC~+50ºC;20%~90RH | |||
| Working temp.and humidity | -20ºC~+85ºC;10%~95RH | ||||
| Safety regulations | Pressure Resistance | O/P-I/P,I/P-O/P:3KVAC | |||
| Isolation Resistance | I/P-O/P, O/P-Shell,O/P-Shell :500VDC/100MΩ | ||||
| Other | size | 78*93*56mm | |||
| Net weight / gross weight | 270/290g | ||||
| 60W Ultra Slim Step Shape DlN Rail HDR-60 series |
|||||||||
| SPEClFlCATlON | |||||||||
| MODEL | HDR-60-5 | HDR-60-12 | HDR-60-15 | HDR-60-24 | HDR-60-48 | ||||
| OUTPUT | DC VOLTAGE | 5V | 12V | 15V | 24V | 48V | |||
| RATED CURRENT | 6.5A | 4.5A | 4A | 2.5A | 1.25A | ||||
| CURRENT RANGE | 0 ~ 6.5A | 0 ~ 4.5A | 0 ~ 4A | 0 ~ 2.5A | 0 ~ 1.25A | ||||
| RATED POWER | 32.5W | 54W | 60W | 60W | 60W | ||||
| RlPPLE & NOlSE(max.) Note.2 | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 240mVp-p | ||||
| VOLTAGE ADJ. RANGE | 5.0 ~ 5.5V | 10.8 ~ 13.8V | 13.5 ~ 18V | 21.6 ~ 29V | 43.2 ~ 55.2V | ||||
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ||||
| LlNE REGULATlON | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ||||
| LOAD REGULATlON | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ||||
| SETUP, RlSETlME | 500ms, 50ms/230VAC 500ms, 50ms/115VAC at full load | ||||||||
| HOLD UP TlME(TYP.) | 30ms/230VAC 12ms/115VAC at full load | ||||||||
| lNPUT | VOLTAGE RANGE | 85 ~ 264VAC(277VAC operational ) 120 ~ 370VDC(390VDC operational ) | |||||||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||||||
| EFFlClENCY(TYP.) | 85% | 88% | 89% | 90% | 91% | ||||
| AC CURRENT(TYP.) | 1.2A/115VAC 0.8A/230VAC | ||||||||
| lNRUSH CURRENT(TYP.) | COLD START 30A/115VAC 60A/230VAC | ||||||||
| PROTECTlON | OVERLOAD | 105 ~ 160% rated output power | |||||||
| Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed Constant current limiting within 50% ~100% rated output voltage, recovers automatically after fault condition is removed |
|||||||||
| OVER VOLTAGE | 5.75 ~ 6.75V | 14.2 ~ 16.2V | 18.8 ~ 22.5V | 30 ~ 36V | 56.5 ~ 64.8V | ||||
| Protection type : Shutdown o/p voltage, re-power on to recover | |||||||||
| ENVlRONMENT | WORklNG TEMP. | -30 ~ +70ºC (Refer to "Derating Curve") | |||||||
| WORklNG HUMlDlTY | 20 ~ 90% RH non-condensing | ||||||||
| STORAGE TEMP., HUMlDlTY | -40 ~ +85ºC , 10 ~ 95% RH non-condensing | ||||||||
| TEMP. COEFFlClENT | ±0.03%/ºC (0 ~ 50ºC )RH non-condensing | ||||||||
| VlBRATlON | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along x,Y, Z axes; Mounting: Compliance to lEC60068-2-6 | ||||||||
| OPERATlNG ALTlTUDE | 2000 meters | ||||||||
| OVER VOLTAGE CATEGORY | ; According to EN61558, EN50178,EN60664-1, EN62477-1; altitude up to 2000 meters | ||||||||
| SAFETY | WlTHSTAND VOLTAGE | l/P-O/P:4kVAC | |||||||
| lSOLATlON RESlSTANCE | l/P-O/P:100M Ohms / 500VDC / 25ºC / 70% RH | ||||||||
| OTHERS | MTBF | 3524.8k hrs min. Telcordia SR-332(Bellcore); 927.6k hrs min. MlL-HDBk-217F(25ºC ) | |||||||
| DlMENSlON | 52.5*90*54.5mm(W*H*D) | ||||||||
| PACklNG | 190g;60pcs/13kg/0.91CUFT | ||||||||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The ambient temperature derating of 3.5ºC/1000m with fanless models and of 5ºC/1000m with fan models for operating altitude higher than 2000m(6500ft). |
||||||||
| NDR-120 120W Rail Type Switching Power Supply | ||||
| Project | Technical index | |||
| Output | DC voltage | 12V | 24V | 48V |
| Rated current | 10A | 5A | 2.5A | |
| Rated power | 120W | 120W | 120W | |
| Ripple and noise | <120mV | <120mV | <150mV | |
| Voltage accuracy | ±2% | ±1% | ||
| Output voltage regulation range | ±10% | |||
| Load adjustment rate | ±1% | |||
| Linear adjustment rate | ±0.5% | |||
| Input | Voltage range | 85-264VAC 47hz-63hz (120vdc-370vdc: DC input can be realized by connecting AC / L +, AC / N (-)) | ||
| Efficiency (typical) | >86% | >88% | >89% | |
| Working current | <2.25A 110VAC <1.3A 220VAC | |||
| Impulse current | 110VAC 20A, 220VAC 35A | |||
| Start, rise, hold time | 500ms,70ms,32ms :110VAC/500ms,70ms,36ms :220VAC | |||
| Protect | overload protection | 105% - 150% type: protection mode: automatic recovery after removing the abnormal condition of constant current mode | ||
| Overvoltage protection | When the output voltage is more than 135%, the output will be turned off. It will recover automatically after the abnormal conditions are removed | |||
| Short circuit protection | +VOWhen the abnormal condition of output is released, it will recover automatically | |||
| Environmental | Working temperature and humidity | -10ºC~+60ºC;20%~90RH | ||
| Storage temperature and humidity | -20ºC~+85ºC;10%~95RH | |||
| Safety/EMC | Withstand voltage | Input output: 3kVac input ground: 1.5kVac output ground: 0.5kvac for 1 minute | ||
| Leakage current | <1mA/240VAC | |||
| Isolation resistance | Input output, input shell, output shell: 500VDC / 100M Ω | |||
| Other | size | 40*125*113mm | ||
| Net weight / gross weight | 707/750g | |||